Niko NIKO Steckdosen 45x45 - SOCLE PUSHB. 6A

Niko - NIKO Schalter und Steckdosensystem 45x45 - 170-04000, NIKO Steckdosen 45x45 - SOCLE PUSHB. 6A EAN 5413736200593

Beschreibung/Description: Mechanism for a 6A push button. This push button is equipped with an amber LED with an E10 lamp base. A finishing set in the colour of your choice must be ordered separately. The contact material contains cadmium oxide. Spezifikationen/Specification: The mechanism is equipped with cage terminals with permanent screws. The screws have a slotted screwhead (slot 4.5x1 mm). Moreover, each screw is equipped with a screwdriver slot. The E10 lamp base is formed by brass strips. The mechanism is also equipped with a third, additional connection terminal for the connection of a lighting unit. The 6 A push button is always equipped with an amber, 230 V LED with an E10 lamp base. Integrating other lamps is possible, up to a max. of 3 W (neon or LED lamps: 6 V, 12 V, 24 V and 230 V), equipped with E10 bases. Incandescent lamps cannot be connected to the 6A flush-mounting push button. The LED lighting unit (1 mA) is screwed into the front side of the E10 lamp base. The amber light is produced by a LED with very limited power (0.2 W). It is shockproof and does not radiate any heat. The LED has a life span of min. 50,000 burning hours. The push button base is made of polycarbonate. The plastic parts of the base are halogen-free and comply with a filament test of 850°C. All connection terminals can contain up to 2 x 2.5 mm² of wire. When mounting the push button in a flush-mounting box with grip surfaces, use claws that can be rotated open using screws with a slotted screwhead (slot 0.8x5 mm). The flush-mounting frame is made of 1 mm-thick metal and after cutting is galvanized on all sides, even on the cut edges. On the horizontal and vertical axes, the flush-mounting frame has 4 grooves for screw mounting in flush-mounting boxes. ... Vertical coupling of the push buttons, centre distance 60 mm, is carried out by telescoping the flush mounting frames. These are automatically locked into place. For vertical coupling, centre distance 71 mm, the flush-mounting frame is equipped with two pre-formed lips at the bottom. The flush-mounting frame is equipped, both on the top and the bottom, with a dark grey, plastic end border. The combination of a push button, central plate and flush surround plate has a protection degree IP41. The contact material contains cadmium oxide. CE marking. CEBEC approved....